srr0805 series - shielded power inductor features available in e12 series low profile - 4.7 mm unit height high current lead free rohs compliant* applications input/output of dc/dc converters power supplies for: portable communication equipment camcorders lcd tvs car radios electrical specifications product dimensions recommended layout typ. 8.0 0.2 (.315 .008) 10.5 0.1 (.413 .004) 2.1 (.082) max. 4.7 (.185) typ. 6.0 (.236) typ. 2.0 (.079) 101 general specifications test voltage........................................1 v reflow soldering.....250 ?; 10 sec max. (in compliance with jedec, j-std-020c, table 4-2) operating temperature .-40 ? to +125 ? (temperature rise included) storage temperature..-40 ? to +125 ? resistance to soldering heat ............................250 ?, 10 sec. max. materials core ...................................ferrite dr&ri wire .............................enameled copper base ......................................lcp e4008 terminal.....................................cu/ni/sn rated current ....................ind. drop 10 % typ. at isat temperature rise ......................40 ? max. at rated irms packaging...................1000 pcs. per reel 2.5 (.099) 2.2 (.086) 5.7 (.224) inductance 1khz q test srf rdc i rms i sat bourns part no. ( h) tol. % ref. frequency min. ( ? ? ) max. typ. (mhz) (mhz) (a) (a) srr0805 - 2r2m 2.2 20 18 7.96m 75.0 0.040 2.50 4.90 srr0805 - 3r9m 3.9 20 20 7.96m 50.0 0.055 2.10 3.70 srr0805 - 5r6m 5.6 20 20 7.96m 40.0 0.065 1.95 3.20 srr0805 - 8r2m 8.2 20 19 7.96m 32.0 0.080 1.75 2.50 srr0805 - 100m 10 20 40 2.52m 28.0 0.100 1.50 2.20 srr0805 - 120m 12 20 40 2.52m 24.0 0.120 1.40 2.10 srr0805 - 150m 15 20 40 2.52m 22.0 0.140 1.30 1.80 srr0805 - 180y 18 15 40 2.52m 19.0 0.160 1.20 1.70 srr0805 - 220y 22 15 38 2.52m 19.0 0.180 1.10 1.50 srr0805 - 270y 27 15 35 2.52m 15.5 0.200 1.00 1.40 srr0805 - 330y 33 15 40 2.52m 13.5 0.240 0.92 1.20 srr0805 - 390y 39 15 35 2.52m 12.0 0.260 0.84 1.10 srr0805 - 470y 47 15 32 2.52m 10.5 0.280 0.75 1.00 srr0805 - 560k 56 10 30 2.52m 9.5 0.380 0.68 0.95 srr0805 - 680k 68 10 28 2.52m 9.0 0.440 0.60 0.90 srr0805 - 820k 82 10 28 2.52m 8.5 0.550 0.54 0.74 srr0805 - 101k 100 10 45 0.796m 7.5 0.600 0.50 0.70 srr0805 - 121k 120 10 42 0.796m 7.0 0.750 0.45 0.66 srr0805 - 151k 150 10 39 0.796m 6.5 0.90 0.40 0.64 srr0805 - 181k 180 10 41 0.796m 4.8 1.05 0.35 0.62 srr0805 - 221k 220 10 38 0.796m 4.5 1.18 0.30 0.55 srr0805 - 271k 270 10 37 0.796m 4.2 1.40 0.27 0.45 srr0805 - 331k 330 10 36 0.796m 3.8 1.80 0.24 0.38 srr0805 - 391k 390 10 35 0.796m 3.6 2.10 0.22 0.36 srr0805 - 471k 470 10 34 0.796m 3.5 2.25 0.20 0.35 srr0805 - 561k 560 10 32 0.796m 3.0 3.00 0.18 0.34 srr0805 - 681k 680 10 32 0.796m 2.8 3.40 0.17 0.32 srr0805 - 821k 820 10 35 0.796m 2.5 4.00 0.16 0.29 srr0805 - 102k 1000 10 35 0.252m 2.2 5.00 0.15 0.24 dimensions: mm (inches) soldering profile 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (seconds) temperature (c) <2> max. of 30 seconds > 220 ? <1> max. of 10 seconds at 250 ? 250 ? <2> <1> 120 - 150 seconds ramp-up 4 ?second maximum ramp-down 5 ?/second maximum *rohs directive 2002/95/ec jan 27 2003 including annex specifications are subject to change without notice. customers should verify actual device performance in their specific applications. *rohs compliant
specifications are subject to change without notice. customers should verify actual device performance in their specific applications. srr0805 series - shielded power inductor rev. 02/06 18 (.709) 22.4 (.882) 2.0 0.5 (.079 .020) 50.0 (1.969) 330 (12.99) dia. 13.0 0.5 (.512 .020) dia. 13.0 0.5 (.512 .020) dia. 21 .8 (.827 .031) embossed carrier embossed cavity 0.10 (.004) thickness max. 200 (7.874) no component no component components 11200 (440.945) 400 (15.748) start 4 (.157) 12 (.472) 16 (.630) end 4.8 (.189) qty: 1000 pcs. per reel user direction of feed packaging specifications dimensions: mm (inches)
|
